Lantronix FOX3 Series Hardware Manual - Page 49
GPRS Coding scheme
View all Lantronix FOX3 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Appendix the FOX3-2G/3G/4G operating firmware, you have to setup a specific configuration and store it in the device. All PFAL commands can be sent to the FOX3-2G/3G/4G with the help of the Workbench software, which is free of charge and can be downloaded from our website. All PFAL commands supported by the FOX3-2G/3G/4G and other AVL devices are listed and described in a separate manual called "AVL_PFAL_Configuration_Command_Set.pdf" which is accessible online on our website under the password-protected area. 9.3. GPRS Coding scheme Coding scheme 1 Timeslot 2 Timeslots 4 Timeslots CS-1: 9.05 kbps 18.1 kbps 36.2 kbps CS-2: 13.4 kbps 26.8 kbps 53.6 kbps CS-3: 15.6 kbps 31.2 kbps 62.4 kbps CS-4: 21.4 kbps 42.8 kbps 85.6 kbps Table 13: Coding schemes and maximum net data rates over air interface Please note that, the values listed above are the maximum ratings which, in practice, are influenced by a great variety of factors, primarily, for example, traffic variations and network coverage. FOX3-2G/3G/4G Series Hardware Manual 49