Lantronix IONADP IONADP Datasheet 121.76 KB - Page 1

Media Converters IONADP The ION Adapter Use to Mount Legacy Point System™ Converter Modules in an ION Chassis IONADP Features • Ease the installation of legacy Point System™ cards in the ION chassis • Redeploy Point System™ cards you own in a new ION chassis • Lengthens a Point System™ card to match the size of the ION card • Can be used with any Point System™ card • Manage Point System™ cards in the ION chassis, if you have a Point System™ Management Module • IONADP kit includes adapter card, bracket, and four screws The IONADP is an adapter card that allows the ION Platform chassis to be backwards compatible with Point System™ modules. This adapter is designed to sit between a Point System™ module and the backplane of the ION chassis. The purpose of the IONADP is to lengthen the Point System™ module so it can be securely mounted in an ION chassis while also connecting to the backplane allowing the ION chassis to power the Point System™ module. SNMP management of the Point System™ modules installed in the ION chassis is possible by using an existing Point System™ management module along with IONADP. The ION modules and the Point System™ modules are managed independently by their own respective management modules. The ION management module and the Point System™ management module would each require a unique IP address assigned to them, while Focal Point can be used to access the management information from each management module simultaneously. Specifications Dimensions Width: 0.5" [12.7 mm] Depth: 1.25" [31.75 mm] Height: 2.9" [73.66 mm] Environment Environment specs are dependent on the chassis chosen Operating: 0°C to 50°C Storage: -40°C to +85°C Humidity: 5% to 95% (non-condensing) Altitude: 0 - 10,000 ft. Weight 0.5 lbs. [0.22 kg] Warranty Lifetime Ordering Information IONADP Point System™ Adapter for the ION chassis, includes bracket and screws 23 +1.952.941.7600 | www.transition.com | [email protected] 21919