Lantronix M M/GE-PSW-PSE-01 Product Brief - Page 2

M/GE-PSW-PSE-01 icon here Media Converters Specifications Standards • IEEE 802.3-2012 • IEEE 802.3af/at PSE-PoE • IEEE 802.3ab • IEEE 802.3z • IEEE 802.3x • IEEE 802.3az Switch Features • Max Packet Size: 10,000 bytes • Max MAC Addresses: 8k • 1Mbit shared buffer memory Status LEDs • PWR On (green) = Power to converter • PoE Off = No PD detected On (yellow) = AF mode On (green) = AT mode Blinking = overload or short circut • Top LED TP Status • Bottom LED Fiber Status Dimensions • Width: 1.8" [46 mm] • Height: 0.85" [22 mm] • Depth: 3.3" [85 mm] Power Consumption • 34W with full IEEE 802.3at 30 Watt load Power Source • External AC/DC 56VDC, 40W power adapter (65W for -JP power supply bundle) Power-over-Ethernet • Max PoE Budget: 30 Watts Environment • Operating: 0°C to +40°C (with included power supply) • Storage: -40°C to +85°C • Humidity: 5% to 95% (non-condensing) • Altitude: 0 - 10,000 ft. Weight • 2 lbs. [0.9 kg] MTBF • M/GE-PSW-PSE-01 only: 2,941,024 hours (Telcordia SR-332) • Included Power Supply only 25173: 159,357 hours (MIL-DHBK-217F) 25188 (-JP Only): 300,000 hours (Telcordia SR-332) Certifications • EN55032-2012 Class A, IEC 61850-3:2002, • EN55024-2010, CE Mark, Power Supply is UL listed Warranty • Lifetime Features ● Wall mount, DIN Rail, or table top installation ● External AC/DC power supply included with country specific power cord ● 2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port ● Supports full 30 Watts of power to the twisted pair port ● SFP slots can support any 100Base-FX or 1000Base-X fiber SFP module ● Supports Auto-Negotiation ● Supports Auto-MDI/MDIX ● Active Link Pass Through (ALPT) - Automatically detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices ● Auto Power Reset - Re-set the power to the end PD device during a Link Pass Through (LPT) event, ensuring it is ready to go when the fault is corrected ● Jumbo frame support ● 8K MAC address table ● LEDs indicators for power status, Link/Activity per port, & PoE status/classification ● Plug-and-Play fixed configuration, no dip-switches ● Over-current protection ● Under-current protection ● Fault protection input Ordering Information Part Number M/GE-PSW-PSE-01 Description 10/100/1000Base-T PoE+ RJ-45 port [100 m/ 328 ft.] to 100/1000Base-X SFP slot (empty) Optional Accessories SFP Modules Description Supports 100 or 1000Base-X Fiber SFPs only Check out our SFPs on Lantronix.com Mounting Options Description WMBM Wall Mount Bracket for Mini DRBM DIN Rail Mount Bracket for Mini RMBM Rack Mount Bracket for Mini, use with RMS19-SA4-02 Note: Cannot be used with M-MCR-01 or E-MCR-05 Racks due to power limitations Power Supply Included To order the corresponding country specific power supply, add the extension from the list below to the end of the SKU; Ex: M/GE-PSW-PSE-01-NA -NA = Country Code -NA = North America -SA = South Africa -LA = Latin America -JP = Japan -EU = Europe -OZ = Australia -UK = United Kingdom -BR = Brazil Contact Information Americas 800.422.7055 [email protected] www.lantronix.com NASDAQ: LTRX Europe +31 (0) 76.52.3.6.74 4 [email protected] Asia/Pacific +852 3955.0218 [email protected] China: +86.21.6237.8868 India: +91 994-551-2488 © 2022 Lantronix, Inc. All rights reserved. Lantronix is a registered trademarks of Lantronix, Inc. in the U.S. and other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice. MPB-00134 Rev A