Lantronix MPS100 LPS1-T & MPS100 - Product Brief - Page 2

Single-Port Print Servers LPS-1-T/MPS100 Features Transport Protocols LPS1-T: TCP/IP, IPX, NetBIOS/NetBEUI and LAT MPS100: TCP/IP, IPX, AppleTalk, NetBIOS/NetBEUI, and LAT TCP/IP Protocols ARP, RARP, ICMP, SNMP, BOOTP, DHCP, TFTP, LPR, Telnet, HTTP (MPS100 only) Data Rates Parallel: Burst rate 150 Kbps Management SNMP Compatible: Supports MIB II parallel MIB Novell Compatibility: Supports both NDS and bindery emulation EZWebCon: Lantronix's management software MPS100: HTTP Device Support Supports printers with Centronics parallel interface System Software Flash ROM Standard: downloadable from a TCP/IP host (TFTP download), DECnet host (MOP download) or NetWare host Diagnostic LEDs LPS1-T: Good Link, OK/Network Activity MPS100: Link, Speed, Network Activity Compatibility Ethernet Version 2.0/IEEE 802.3/802.3u Agency Approvals LPS1-T: FCC, UL, CSA, TUV, CE MPS100: FCC, C/UL, TUV, CE Hardware Network Interface LPS1-T: 10Base-T (RJ45) MPS100: 10/100Base-T (RJ45) Printer Interface 36-pin male Centronics, attaches directly to 36-pin female Centronics parallel printer port supports HP Bitronics mode to provide bi-directional high speed data flow on the parallel port Power Requirements LPS1-T: 6 VDC @ 0.7A (External adapter included), 120 or 220 VAC, 50/60 Hz MPS100: 5 VDC @ 0.7A (External adapter included), 120 VAC or 220 VAC, 50/60 Hz Environmental Operating Temperature: 5° to 50°C (41° to 122°F) Storage Temperature: -40° to 66°C (-40° to 151°F) Heat Dissipation: 5 Watts Physical Dimensions (L x W x H) 8.4 x 5.8 x 2.5 cm (3.30 x 2.30 x 1.00 in) Weight .31 lbs (.14 kg) Shipping Dimensions (L x W x H) 18.73 x 22.86 x 11 cm (7.375 x 9 x 4.375 in) Shipping Weight 2.7 lbs (1.23 kg) Warranty 1-year limited warranty Ordering Information LPS1-T-01 Print server, direct connect parallel port, Centronics compatible, RJ45 (10Base-T) network port, diagnostic LEDs, User Guide, CD-ROM with EZWebCon software and reference manual, external 120 VAC power supply LPS1-T-02 Same as above with 220 VAC power supply MPS100-11 10/100 print server, direct connect parallel port, Centronics compatible, RJ45 (10/100Base-T) network port, web based management, diagnostic LEDs, User Guide CD-ROM with EZWebCon software and reference manual, external 120 VAC power supply MPS100-12 Same as above with 220 VAC power supply MPS100-13 Same as above without power supply (printer powered) 15353 Barranca Parkway | Irvine | CA 92618 | USA | Tel: 800.422.7055 | Fax: 949.450.7232 | www.lantronix.com © 2005, Lantronix, Inc. Lantronix is a registered trademark, and EZWebCon and ActiveLinx are trademarks of Lantronix. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-310 11/05 DGS1000