Lantronix MatchPort b/g MatchPort b/g - Product Brief - Page 2

Embedded Wireless Device Server MatchPort b/g Features and Specifications Wireless Specifications Wireless Standards: IEEE 802.11b; 802.11g Channel Frequency Range: 2.412 - 2.484 GHz Maximum Output Power: 14dBm +2.0 dBm/-1.5 dBm (does not include antenna gain) Maximum Receive Sensitivity: -91dBm @ 1Mbps Data Rates With Automatic Fallback 54Mbps - 1Mbps Range: Up to 328 feet indoors Modulation Techniques: OFDM, DSSS, CCK, DQPSK, DBPSK, 64 QAM, 16 QAM Serial Interface Two Serial Ports Interface: CMOS (Asynchronous) 3.3V-level signals, rate is software selectable (300 bps to 921,000 bps) Serial Line Formats: 7 or 8 data bits, 1-2 Stop bits Parity: odd, even, none Modem Control: DTR, DCD Flow Control: XON/XOFF (software), CTS/RTS (hardware), none Network Interface Interface:Wireless 802.11b and 802.11g Protocols Supported: ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP, SMTP, TFTP Management Internal web server SNMP (read only) Serial login Telnet login DeviceInstaller software Security IEEE 802.11i - PSK with AES-CCMP Encryption WPA - PSK TKIP Encryption 64/128-bit WEP Internal Web Server Serves web pages Storage capacity: 1.2 MB Architecture CPU, Memory: Lantronix DSTni-EX x86 CPU, on-chip 256 KB zero wait static SRAM, 2,048 KB Flash, 16 KB Boot ROM, 8 GPIO Firmware: Upgradeable via TFTP and serial port Power Consumption Average Power Consumption: Data Transfer • 740 mW (Low cpu); active • 250 mW (Low cpu); inactive Peak Supply Current: 360 mA Data Transfer Environmental Operating range, WLAN: -40° to 70°C (-40° to 158°F) Storage range: -40° to 85°C (-40° to 185°F) Packaging Dimensions: 44.4 x 44.4 x 10.4 mm (1.75 x 1.75 x .41 in) Weight: 14g Material: Plastic shell, 260°C tolerant Warranty 2-year limited warranty Included Software Windows® 98/NT/2000/XP/Vista based DeviceInstaller configuration software and Com Port Redirector™, Web-Manager The included DeviceInstaller software makes configuration quick and easy! MatchPort b/g Demonstration Kit The demonstration kit contains the key accessories to evaluate a MatchPort b/g product: • MatchPort b/g demonstration board • RS-232 cable, DB9F, null modem • Cat5e UTP RJ45M/M Ethernet cable • 3.3V power supply • Antenna Note: MatchPort b/g sample must be purchased separately. Ordering Information Part Number MP1001000G-01 MP1002000G-01 MP100200SG-01 MP10010NMK-01 930-033-R 500-180-R-ACC 500-181-R-ACC Description - MatchPort b/g bulk pack - Minimum order quantity 50 units - MatchPort b/g AES bulk pack - Minimum order quantity 50 units - MatchPort b/g AES sample case - One (6 in.)Antenna cable U.FL to R-SMA (p/n 500-180-R-ACC) - One MatchPort b/g enclosed - Free 30-day Secure Com Port Redirector™ evaluation license - Order quantities of up to 10 - MatchPort b/g Demonstration Kit - Accessory antenna - Antenna cable (6 in.) U.FL to R-SMA (10 pack) - Antenna cable (6 in.) U.FL to U.FL (10 pack) Lantronix Corporate Headquarters 167 Technology Drive Irvine CA 92618 t: 800.422.7055 [email protected] NASDAQ: LTRX European Headquarters t: +31 (0) 76 52 36 74 4 [email protected] Asia/Pacific Headquarters t: +852 3428 2338 [email protected] ©2013 Lantronix is a registered trademark, and MatchPort, DSTni, Secure Com Port Redirector and DeviceInstaller are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-514 Japan Headquarters t: +81.3.6277.8802 [email protected]