Lantronix Mobility Accessories RFID-A-B-EXT Product Brief - Page 1

LANTRONIX , a storied M2M and IoT specialist from Germany, designs, manufactures and sells world-wide state-of-the-art devices, services and solutions ideally suited to numerous applications:fleet management, car sharing, usage-based insurance, asset and workforce tracking and security, precision farming. RFID-A-B-EXT an accessory for all FALCOM AVL devices for asset and driver identifications PRODUCT OVERVIEW RFID-A-B-EXT is a Radio Frequency Identification (RFID) solution designed for short range applications. It is based on the ISO 14443 Type A/B standard for RFID devices. The RFIDA-B-EXT is an extension to all FALCOM AVL devices. It connects via 5 m cable with corresponding adapter cable to the respective FALCOM AVL device. The reader includes an anti-collision mechanism that allows it to detect and identify all transponders in its operating range and individually access to each one of them. The RFID reader provides also an anti-clone function which protects an application from counterfeiting and requires to authenticate the transponders. When multiple transponders are around a reader, only one transponder can be read at a time. APPLICATION TECHNICAL SPECIFICATION Connection cables: - CA31 - CA69 CONTACT LANTRONIX, INC. | 7535 Irvine Center Drive - Suite 100 | Irvine, CA 92618, United States of America | Tel: (800) 526-8766 | Tel: +1 (949) 453-3990 | Fax: +1 (949) 453-3995 | [email protected] RFID-A-B-EXT - ISO/IEC 14443 A / MIFARE® mode - ISO/IEC 14443 B communication scheme - Operating distance to a 14443A / MIFARE® up to 50 mm - 13.56 MHz Carrier Frequency - 847 kHz Sub-carrier Frequency - 106 kbit/s Data Transfer - 8 bit Chip_ID based anti-collision system - 64 bit Unique Identifier Interfaces - 4pin(2x2) connector Ÿ 1 x Power input: +12...+24 VDC Ÿ 1 x Serial Port V24 (RX, TX) Ÿ 1 x Ground (GND) - 2 x LED indicators Serial Communication settings: - 38400 bps baud rate, 8 data bits, no parity, 1 stop bit Physical Characteristics Dimensions (DxH): 70 mm x 13 mm Weight: 80 g Connection Interface to FALCOM AVL devices: - via the corresponding connection cable Operating Temperature Range -20°C ... +80°C Connection Cables: - CA31 (2x4pin & 2x2pin connectors ; cable length: 1.5m) - CA69 (2x3pin & 2x2pin connectors; cable length: 1.5m) RFID-Tags - RFID transponders (Tags) should be ordered separately - Ordering names: RFID-TAGS-PACK-TYPE-A © 2019 Lantronix, Inc. All rights reserved. Lantronix is a registered trademark of Lantronix, Inc. in the U.S. and other countries. NFC Reader is a trademark of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice MPB-00071, Rev B.