Lantronix N-FXE-xx-02 Series N-FXE-02 Series User Guide Rev D - Page 5

1: Introduction 1 Introduction This document applies to the Lantronix N-FXE-xx-02 100Base-FX Fiber Adaptor NIC Cards. Product Description The N-FXE-xx-02 Series is a Fiber Fast Ethernet to PCI-Express (PCIe) bus adapter that fully complies with all IEEE 802.3u and 100Base-FX standards. It provides up to 200Mbps full-duplex bandwidth capacity to support high-end systems. In addition, with advanced functions like VLAN filtering packet processing, the adapter provides added performance, flexible configuration and secure networking to users in a standards-based environment. The PCI-Express (PCIe) design gives you the maximum possible bandwidth and bus efficiency, along with low power consumption. For users equipped with PCI-Express systems, N-FXE-xx-02 Series provides the ability to easily build or connect to Fast Ethernet fiber networks. Two LED indicators (LINK/ACT and FDX) on the bracket display NIC link activities and full-duplex status. The N-FXE-xx-02 support Preboot Execution Environment (PXE). The Multi-Boot Agent (MBA) software module lets your networked system boot with the images provided by remote systems across the network. Ordering Information Part Number N-FXE-ST-02 N-FXE-SC-02 N-FXE-LC-02 N-FXE-MT-02 Fiber Port 100Base-FX 1300nm multimode (ST); [2 km/1.2 mi.*] Link Budget: 12.0 dB. Standard & LP brackets; PXE boot included. 100Base-FX 1300nm multimode (SC); [2 km/1.2 mi.*] Link Budget: 12.0 dB. Standard & LP brackets; PXE boot included. 100Base-FX 1300nm multimode (LC); [2 km/1.2 mi.*] Link Budget: 13.0 dB. Standard & LP brackets; PXE boot included. 100Base-FX 1300nm multimode (MT-RJ); [2 km/1.2 mi.*] Link Budget: 12.0 dB Standard & LP brackets; PXE boot included. * Typical max. cable distance. Actual distance depends on installed network physical characteristics. N-FXE-xxx-02 User Guide, 33509 Rev. D 5