Lantronix NM2-FXS-01 M.2 Ethernet Fiber Network Interface Card Overview - Page 2

M.2 Ethernet Fiber NICs Specifications NM2-FXS-01 NM2-GXE-01 NM2-FXS-201 NM2-GXE-201 Compatible PCs Dell OptiPlex™ 7040/7050 & 7080/7090 (35W) Micro, Wyse 7040/7050 Series thin clients Dell OptiPlex™ 7040/7050 Micro PCs, Wyse 7040/7050 Series thin clients Dell OptiPlex™ 3060/5060/7060/7070 Micro PCs NM2-GXE-201: Dell OptiPlex™ 3060/5060/7060/7070 and 7080/7090 (35W) Micro PCs NM2-GXE-201A: Dell OptiPlex™ 7080/7090 (65W) Micro PCs Data Rate (full duplex only) 100 Mbps 1000 Mbps 100 Mbps 1000 Mbps Connector Types Provided SFP only Fixed LC or open SFP slot Provided SFP only Fixed LC or open SFP slot Power Consumption 120mA @ 3.3V (0.4 Watts typical without SFP module) LC Version: 250mA @ 3.3V (0.8 Watts typical) SFP Version: 120mA @ 3.3V (0.4 Watts typical without SFP Module) 120mA @ 3.3V (0.4 Watts typical without SFP module) LC Version: 250mA @ 3.3V (0.8 Watts typical) SFP Version: 120mA @ 3.3V (0.4 Watts typical without SFP Module) All of the above M.2 Ethernet Fiber Network Interface Cards Standards IEEE 802.3-2012 Bus Slot M.2 - '2230-D4-A-E' Max Frame Size 9014 bytes Status LEDs LINK/ACT; ON = Link; Flashing = Activity Dimensions: M.2 NIC 2230-D4-A-E Width: 0.87" [22 mm], Depth: 1.18" [30 mm], Height: 0.12" [3.08 mm] Dimensions: Width: 1.65" [42 mm], Depth: 2.05" [52 mm], Height: 0.51" [13 mm] Fiber Interface Dimensions: NM2-FXS-01 = 2.99" [76 mm], NM2-FXS-201 & NM2-GXE-201 = 5.013" [127.33 mm], FFC Cable NM2-GXE-201A = 4.911" [124.74 mm] Software Support Windows 10, 8, 8.1, and 7 (32/64 bit); Linux Power Source M.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification) Environment Operating: 0°C to +45°C Storage: -40°C to 85°C Humidity: 5% to 95% (non-condensing) Altitude: 0 - 10,000 ft. Certifications CE Mark; Emissions: EN55032, FCC Part 15 Class A, FCC Part 15 Class B (NM2-GXE-201); Immunity: EN55024 Warranty Lifetime