Lantronix NM2-FXS-2230-SFP-01 NM2-FXS-01 Product Brief - Page 1
Lantronix NM2-FXS-2230-SFP-01 Manual
View all Lantronix NM2-FXS-2230-SFP-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
M.2 Fast Ethernet Fiber Network Interface Card for Dell OptiPlex™ 7040/7050 & 7080/7090 (35W) Micro PCs & Wyse 7040/7050 Series 100Base-FX Lantronix M.2 Fast Ethernet Fiber Network Interface Card (NIC) provides a fiber optic interface for the Dell OptiPlex™ 7040, 7050, and 7080/7090 (35W) Micro PCs & Wyse 7040/7050 Series Thin Clients. The NM2FXS-2230-SFP-01 consists of a M.2 NIC that installs into the OptiPlex Micro PC's M.2 "A or E keyed" interface, a fiber optic adapter that installs into the OptiPlex Micro PC's Option port, and a 20-pin Flat Flex Cable (FFC) that connects the NIC to the fiber adapter. The fiber optic adapter is an open SFP with a 100Base-FX to SGMII SFP Module (included). Ordering Information NM2-FXS-2230-SFP-01 M.2 NIC, 100Base-FX to SGMII SFP media converter (included) Features ● PCI Express M.2 compliant ● A + E keyed M.2 interface ● Full duplex ● Flow control ● Wake on LAN (WOL) ● Smart Load Balancing (SLB) ● TCP Segmentation Offload (TSO) ● Message Signaled Interrupts (MSI) ● Extended Message-Signaled Interrupts (MSI-X) ● LACP support (Teaming) ● IPv6 Capable ● Supports UEFI ● Supports PXE boot ● Jumbo frame support 9014 bytes ● 100Base-FX to SGMII SFP interface Specifications Standards IEEE 802.3-2012 Bus Slot M.2 - '2230-D4-A-E' Data Rate 100 Mbps (full duplex only) Max Frame Size 9014 bytes Status LEDs LINK/ACT ON = Link Flashing = Activity Dimensions (M.2 NIC) 2230-D4-A-E Width: 0.87" [22 mm] Depth: 1.18" [30 mm] Height: 0.12" [3.08 mm] Dimensions (Fiber Interface) Width: 1.65" [42 mm] Depth: 2.05" [52 mm] Height: 0.51" [13 mm] Dimensions (FFC Cable) Length: 2.99" [76 mm] Software Support Windows 10, 8, 8.1, and 7 (32/64 bit); Linux Power Consumption 120mA @ 3.3V (0.4 Watts typical not including SFP module) Power Consumption (SFP) 330mA @ 3.3V (1 Watt typical) Power Source M.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification) Environment Operating: 0°C to +45°C Storage: -40°C to 85°C Humidity: 5% to 95% (non-condensing) Altitude: 0 - 10,000 ft. Weight 0.1 lbs. [0.05 kg] Certifications CE Mark; Emissions: EN55032, FCC Part 15 Class A; Immunity: EN55024 Warranty Lifetime Network Adapters 040722