Lantronix Open-Q 626 SOM Development Kit Open-Qtm 626 uSOM Development Kit Qui - Page 1

Lantronix Open-Q 626 SOM Development Kit Manual

Page 1 highlights

Open-Q™ 626 µSOM Development Kit Quick Start Guide Package Contents 1. Open-Q™ 626 µSOM with Qualcomm® APQ8053-Pro SoC 2. Open-Q™ 626 Carrier board 3. STEVAL_MKI128V6 sensor accessory board 4. AC Power Adapter 5. HDMI Video Cable 6. 4.5" FWVGA MIPI DSI LCD/touchscreen (optional accessory) 6 7 8 9 10 11 12 13 14 15 16 1. WLAN PCB Antenna 24. SOM power measurement 2. Audio output expansion header header 3. Volume + button 25. GPIO expansion header 4. General Purpose button 5. Audio input expansion header 26. Volume - button 27. Power button 5 6. 12V DC input jack 28. MIPI DSI LCD/touchscreen connector to interface with 7. Power source switch Intrinsyc display adapter 8. Battery connector 29. 16GB eMMC flash memory 9. Battery charge config switch 30. APQ8053-Pro 4 10. HDMI video output 31. 2GB LPDDR3 RAM memory 11. 3.5 mm headset jack 32. GPS antenna connector U.FL 3 12. Power header 33. WLAN antenna connector U.FL 13. USB Type-C connector 14. Debug UART (USB MicroB) 34. Open-Q 626 µSOM (micro System on Module) 2 15. GPS ext. ant. SMA connector 16. GPS PCB Antenna (on bottom) 17. MIPI camera 2 connector 18. Micro SD slot (on bottom) 19. MIPI camera 1 connector 20. MIPI camera 0 connector 1 21. Sensor board header 22. Configuration DIP switches 23. 3 x LEDs 34 31 30 29 17 18 32 19 33 20 21 22 23 24 25 26 27 28 Your use of this document is subject to and governed by those terms and conditions (https://www.intrinsyc.com/legal-terms/qualcomm-terms.html) in the Intrinsyc Purchase and Software License Agreement for the Open-Q™ 626 µSOM Development Kit based on the Qualcomm® APQ8053Pro SoC, which you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing an Open-Q™ 626 µSOM Development Kit from Intrinsyc Technologies Corporation ("Agreement"). You may use this document, which shall be considered part of the defined term "Documentation" for purposes of the Agreement, solely in support of your permitted use of the Open-Q™ 626 µSOM Development Kit under the Agreement. Distribution of this document is strictly prohibited without the express written permission of Intrinsyc Technologies Corporation and its respective licensors, which they can withhold, condition or delay in its sole discretion. Lantronix is a registered trademark of Lantronix, Inc. in the United States and other countries. Intrinsyc is a trademark of Intrinsyc Technologies Corporation, registered in Canada and other countries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names used herein may be trademarks or registered trademarks of their respective owners. Qualcomm APQ8053-Pro is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.

  • 1
  • 2

Open
-
Q
626 µSOM Development Kit
Quick Start Guide
Your use of this document is subject to and governed by those terms and conditions (
) in the Intrinsyc Purchase and Software License Agreement for the Open-
Q™ 626 µSOM Development Kit based on the Qualcomm® APQ80
53-
Pro SoC, which you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing an Open-
Q™ 626 µSOM Development Kit from Intrinsyc Technologies Corporation (“Agreement”). You may use this document, which shall be conside
red part of the defined term
“Documentation” for purposes of the Agreement, solely in support of your permitted use of the Open
-
Q™ 626 µSOM Development Kit u
nder the Agreement. Distribution of this document is strictly prohibited without the express written permission of Intrinsyc Technologies Corporation and
its respective licensors, which they can withhold, condition or delay in its sole discretion.
Lantronix is a registered trademark of Lantronix, Inc. in the United States and other countries. Intrinsyc is a trademark of Intrinsyc Technologies Corporation, registered in Canada and other countries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
countries. Other product and brand names used herein may be trademarks or registered trademarks of their respective owners.
Qualcomm APQ8053-Pro is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Package Contents
1.
WLAN PCB Antenna
2.
Audio output expansion header
3.
Volume + bu°on
4.
General Purpose bu°on
5.
Audio input expansion header
6.
12V DC input jack
7.
Power source switch
8.
Ba°ery connector
9.
Ba°ery charge config switch
10.
HDMI video output
11.
3.5 mm headset jack
12.
Power header
13.
USB Type
-
C connector
14.
Debug UART (USB MicroB)
15.
GPS ext. ant. SMA connector
16.
GPS PCB Antenna (on bo°om)
17.
MIPI camera 2 connector
18.
Micro SD slot (on bo°om)
19.
MIPI camera 1 connector
20.
MIPI camera 0 connector
21.
Sensor board header
22.
Configura±on DIP switches
23.
3 x LEDs
24.
SOM power measurement
header
25.
GPIO expansion header
26.
Volume
-
bu°on
27.
Power bu°on
28.
MIPI DSI LCD/touchscreen
connector to interface with
Intrinsyc display adapter
29.
16GB eMMC flash memory
30.
APQ8053
-
Pro
31.
2GB LPDDR3 RAM memory
32.
GPS antenna connector U.FL
33.
WLAN antenna connector U.FL
34.
Open
-
Q 626 µSOM (micro Sys-
tem on Module)
1.
Open
-
Q™ 626 µSOM with Qualcomm® APQ8053
-
Pro SoC
2.
Open
-
Q™ 626 Carrier board
3.
STEVAL_MKI128V6 sensor accessory board
4.
AC Power Adapter
5.
HDMI Video Cable
6.
4.5” FWVGA MIPI DSI LCD/touchscreen (op±onal accessory)
1
3
4
8
11
13
17
19
21
15
2
5
9
12
25
6
16
7
14
20
28
29
31
33
32
30
27
22
10
23
34
26
24
18