Lantronix PremierWave 2050 Quick Start Guide - Page 2

PremierWave® 2050 Quick Start Guide 3. CONNECT TO WEB MANAGER The steps below outline mechanism to access the web manager in order to configure the PremierWave 2050 device. 1. Connect to SSID PW2050-XXXX, where XXXX refers to the SN on the evaluation board. 2. Connect to 192.168.0.1 using your browser. The default USER ID = admin and PASSWORD = PASS (both are case sensitive) 4. Your initial setup is now complete and the Premierwave 2050 is now configurable through the web manager. 3. In the Quick Setup page, bridging and wireless interfaces can be configured. Bridging can be enabled and the Premierwave 2050 can be connected to a network from the list of available wireless networks. 4. COMPLETE THE CONFIGURATION Continue with the rest of the unit configuration using the Web User Interface(UI). Context sensitive help is available in-line within the Web UI. Note: Please change the admin access password from the factory default password. The unit can also be configured using the Command Line Interface (CLI). The CLI is accessible via Telnet/SSH or via the Serial Port. For detailed instructions, please refer to the PremierWave 2050 User Guide and Command Reference Guide: http://www.lantronix.com/ support/downloads. Contact Technical Support For technical support queries, visit http://www.lantronix.com/support or call (800) 422-7044 Monday - Friday from 6:00 a.m. - 5:00 p.m., Pacific Time, excluding holidays. Latest Firmware For the latest firmware downloads, visit http://www.lantronix.com/support/downloads IP Address Assignment Tutorial To view a tutorial on how to assign an IP address, visit http://www.lantronix.com/support/tutorials © 2016 Lantronix, Inc. Lantronix and PremierWave are registered trademarks of Lantronix, Inc. All other trademarks are the property of respective owners. Specifications subject to change without notice. 900-773-R Rev A