Lantronix PremierWave 2050 Evaluation Kit - User Guide - Page 7

2: Evaluation Kit The evaluation kit for the PremierWave 2050 module provides an excellent starting point for evaluating the key features and capabilities of the module. The kit can also be used with other elements of the system to facilitate quick integration via the available interface ports. PremierWave 2050 Evaluation Kit Contents Two versions of the Lantronix PremierWave 2050 evaluation kit are available: The kit identified by part number PWGG2051000K includes an evaluation board with installed PW20501 module which has two U.FL connectors and two RP-SMA connectors. The kit with part number PWGG2052000K includes an evaluation board with installed PW20502 module which has one on-module antenna, one U.FL connector, and one RP-SMA connector. Both evaluation kit contents include the following: ♦ PremierWave 2050 module ♦ Evaluation board with installed PremierWave 2050 module ♦ 5V, 1A wall adaptor ♦ 2 dBi swivel type antenna (2x in PWGG2051000K) ♦ CAT5 Ethernet cable (10 feet) Evaluation Board Description The PremierWave 2050 evaluation board provides a test platform for the Lantronix PremierWave 2050 module. The evaluation board uses either a 5V power from a USB device port connector or a power supplied to the Ethernet connector via Power-Over-Ethernet (PoE). The evaluation kit includes a 5V wall adapter with a USB plug to allow powering the evaluation board from a standard power strip. The evaluation board includes all the necessary regulators to power the PremierWave 2050 module and contains the following features: ♦ Two DB9 serial port connectors with multi-protocol RS232, RS422, RS485 transceivers at rates up to 1 Mbps. Serial port modes are configured by on-board jumpers. ♦ One RJ45 10/100 Ethernet port with an integrated PoE regulator to allow powering from a standard POE PSE. ♦ One mini-type B USB device port connector for 5V input power. This port also has an integrated USB-to-serial converter. The USB-to-serial converter is connected to the PremierWave 2050 module serial debug port. ♦ A second mini-type B USB device port is available for connection to the PremierWave 2050 module USB 2.0 high speed device port. ♦ Two USB host ports are available on a dual USB type A connector. One of the ports is USB 2.0 high speed and the second is USB 2.0 full speed. ♦ LEDs are available for the Ethernet, WLAN, and system status outputs. The Ethernet LEDs are integrated with the RJ45 Jack. ♦ Access to all logic level IO signals on the PremierWave 2050 via header pins for measurements and connections to other places. PremierWave® 2050 Enterprise Wi-Fi® IoT Module Evaluation Kit User Guide 7