Lantronix PremierWave XN PremierWave XN - User Guide - Page 17
: Installation of PremierWave XN, Package Contents, User-Supplied Items, Hardware Components
View all Lantronix PremierWave XN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3: Installation of PremierWave XN This chapter describes how to install the PremierWave XN device server. It contains the following sections: Package Contents User-Supplied Items Hardware Components Wi-Fi Protected Setup (WPS) Installing the PremierWave XN Package Contents The PremierWave XN package includes the following items: One PremierWave XN device One Power Supply 12 VDC with international adapters Two External Antenna, RPSMA Connector One RJ-45 Ethernet Straight Cat5 Cable, 1.5 meter Quick Start Guide User-Supplied Items To complete your installation, you need the following items: RS-232/422/485 serial devices that require network connectivity. A serial cable, as listed below, for each serial device. One end of the cable must have a female DB9 connector for the serial port. - A null modem cable to connect the serial port to another DTE device. - A straight-through modem cable to connect the serial port to a DCE device. An available connection to your Ethernet network and an Ethernet cable. A working AC power outlet if the unit will be powered from an AC power adapter. Hardware Components Front/Top Panel Figure 3-1 shows the top panel view of the PremierWave XN. Table 3-6, Table 3-7, Table 3-8, Table 3-9 and Table 3-10 list and explain the behavior of the LEDs on the top panel. PremierWave XN User Guide 17