Lantronix S3220 Series CLI initial Set-up Procedure PDF 802.33 KB - Page 3

CLI Initial Setup YOUR NETWORK. OUR CONNECTION. Application Note 305 - CLI Initial Setup Procedure Click Browse. Locate and select the USB driver downloaded earlier Click Next. Installation of the driver begins When finished installing, click Finish. After USB driver installation, configure the PC COM port. Set up the terminal emulator: Bits per second: 115200 Data bits: 8 Parity: none Stop bit: 1 Flow Control none Default user name and password The S323x comes from the factory with the following default Username/password.
USB CLI/Telnet/IP Interface: Username: ION Password: private Default IP configuration The S323x comes from the factory with the following default IP configuration.
IP address: 192.168.0.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1 www.transition.com Transition Networks, Inc. 10900 Red Circle Drive Minnetonka, MN 55343 USA Transition Networks Inc. offers networking connectivity solutions that make networks perform better, faster and more reliably while helping companies leverage their existing networking infrastructure. +1 (952) 941-7600 | 1 (800) 526-9267 | © 2010 Transition Networks, Inc. | 305 - CLI