Lantronix SGX 5150 IoT Device Gateway SGX 5150 Quick Start Guide - Page 2

SGX 5150 QUICK START GUIDE IoT Device Gateway Wireless QuickConnect 1. Attach the two antennas and insert the USB cable to power up the gateway. 2. From your Wi-Fi device connect to SSID SGX5150_*, where * is the gateway 12-digit serial number. 3. From your browser, connect to 192.168.0.1. The factory default username is "admin" and the factory default password is the last 8 characters of the Device ID (for devices manufactured after January 1, 2020) or "PASS" (for all older devices). For security purposes, please change the admin password during initial setup. 4. Select Wireless QuickConnect, choose the appropriate network name for the gateway to connect with, and follow the prompts for your wireless network required security parameters. 5. Click Apply to save and complete the wireless network setup. IMPORTANT NOTE FOR SGX'S WITH LAN CONNECTIONS AND POE POWERING OPTION Models SGX 35xx and SGX51xx are only intended for installation in Environment A as defined in IEEE 802.3af. All interconnected equipment must be contained within the same building, including the interconnected equipment associated with LAN connections. Registration To register your gateway scan the QR code, or please visit www.lantronix.com/product-registration. Technical Support For the latest documentation, software, tutorials and all technical support, please visit http://www.lantronix.com/support. © 2020 Lantronix, Inc. Lantronix is a registered trademark of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications are subject to change without notice. All rights reserved. 900-775-R Rev. D