Lantronix SLM Lantronix SLM - User Guide - Page 62

7: Network and Modem Settings Network Port(s) Notes:  On the SLM-02, both Network Ports 1 and 2 are 10/100/1000Base-T. Previous versions of the SLM have one 10/100Base-T and one 10/100/1000Base-T network port.  One possible use for the two Ethernet ports is to have one port on a private, secure network, and the other on an unsecured network.  Both Ethernet ports should not be on the same subnet. To enter settings for one or both network ports: 1. On the menu, click Configuration > Network Settings. The following page opens: Figure 7-3 Network Settings Page 2. Enter the following information for one or both network ports: Table 7-4 Network Port Settings Network Port Setting Description Network Port Settings Disabled: This is the default setting for Network Port 2. Obtain from DHCP: Acquires IP address, subnet mask, and gateway from the DHCP server. (The DHCP server may provide the gateway, depending on its setup.) This is the default setting for Network Port 1. If you select this option, skip to step 3. Obtain from BOOTP: Lets a network node request configuration information from a BOOTP "server" node. Skip to step 3. Specify: Requires you to assign a static IP address manually. The administrator generally provides the IP address. SLM User Guide 62