Lantronix SLP 8 Lantronix SLP - User Guide - Page 70
To reset the trap destination, Enter, To set the trap timer, Example
View all Lantronix SLP 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4: Advanced Operations SLP: set snmp trapdest1 64.42.31.208 The following sets the trap destination 2 to snmp.lantronix.com: SLP: set snmp trapdest2 snmp.lantronix.com To reset the trap destination: 1. At the command prompt, type set snmp, trapdest1 or trapdest2, 0.0.0.0 and press Enter. Setting the trap timer The Set Traptime command sets the timer period between repeated error-condition traps. The valid range for the timer period is 1 to 65535 (in seconds). The default value for the timer period is 60 seconds. To set the trap timer: 1. At the command prompt, type set traptime, followed by the timer period and press Enter. Example The following sets the timer period to 180 seconds: SLP: set traptime 180 Setting the Get/Set community strings Two SNMP community strings provide varying levels of access to objects defined in the private enterprise MIB extensions. Community strings may be 1 to 24 characters. Setcomm The Setcomm string provides read-write access to private enterprise MIB objects. The default Setcomm string is "private" To set the Setcomm community string: 1. At the command prompt, type set snmp setcomm, followed by the string and press Enter. Getcomm The Getcomm string provides read-only access to private enterprise MIB objects. The default Getcomm string is "public". To set the Getcomm community string: 1. At the command prompt, type set snmp getcomm, followed by the string and press Enter. SecureLinx SLP Remote Power Manager 69