Lantronix SRA Series Web User Guide PDF 5.05 MB - Page 8
For More Information, Related, Manuals
View all Lantronix SRA Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Lantronix Secure Remote Access (SRA) Web User Guide 11. Fill in Mgmt IP, Client IP, and Client count. (Note: Leave VPN Mode as "Disabled".) 12. Select Save VPN Config. 13. Go to Configurations tab and select Add MAP. 14. Fill in Internet facing IP, External Port, set Mode to VPN, set Status to Enabled in the order shown below. 15. Select Save MAP Config. You will now lose connection to the RAD unit.. 16. Connect WAN1 and LAN1 into 192.168.2.0/24 network at the remote site. For More Information For Lantronix Drivers, Firmware, etc. go to the Product Support webpage (logon required). For Lantronix Manuals, Brochures, Data Sheets, etc. go to the Support Library (no logon required). Related Manuals include: • Secure Remote Access (SRA) Quick Start Guide, 33837 • Secure Remote Access (SRA) Install Guide, 33838 • Secure Remote Access (SRA) CLI Reference, 33839 • Release Notes (version specific) 33795 Rev. B https://www.lantronix.com/ Page 8 of 110