Lantronix SRA Series CLI Reference PDF 1.47 MB - Page 61

Lantronix Secure Remote Access (SRA) CLI Reference Command: Description: Mode: Parameters: do To run exec commands in config mode RAD Config Mode backup Create a backup of current configuration configure Enter configuration mode firmware Install new firmware no Negate or restore defaults noping ncurses oping utility to monitor up to 8 hosts ping Send messages to network hosts reboot Halt and perform a cold restart reload Reload a configuration show Show live information traceroute Print the route packets trace to network host update Install new firmware type Install new firmware scp Install file retrieval via scp url Install file retrieval via URL usb Install file from USB stick (only 1 USB stick should be inserted) String scp url in format user@host:path/to/file String url in format proto://host/path/to/file proto can be http, tftp, ftp String Name of file in top-level directory on USB stick partition_number Number of partition on USB Stick with the install file A.B.C.D IP Address to ping ip Send ICMP Ipv4 messages to network hosts (default) ipv6 Send ICMP Ipv6 messages to network hosts arp Send ARP requests to a I host String Hostname or IP-address to ping source Source IP-address (ip) or interface (ip and arp) repeat Requests to send count, default is 5 resolve Resolve names broadcast Ping broadcast address size Packet size interval The time interval between packets, default is 1 flood Flood ping Unsigned integer Requests count Unsigned integer Number of data bytes to send String Interval between packets duplicate-detect Duplicate address detection mode clock Show current time firmware Display firmware information interface Ethernet Interface status ip IP information maps Display connected MAP information rad Display SRA RAD configuration system Show system information 33839 Rev. B https://www.lantronix.com/ Page 61 of 100