Lantronix TN-CWDM-10G-1xx0-80 Series 10G SFPs User Guide Rev E - Page 4

Lantronix TN-SFP-10G-xx and TN-CWDM-10G-xxx User Guide Product Description Lantronix TN-SFP-10G-xx and TN-CWDM-10G-xxx TN-SFP-10G-xx and TNCWDM-10G-xxx series Cisco Compatible 10G Small Form Factor Pluggable (SFP+) transceiver modules are designed to install in any SFP+ port. These SFP+ modules allow an interface to the network through the SFP+ connector, and are designed for bi-directional, serial-optical data communications, at speeds up to 10.5 Gbps. The Lantronix TN-SFP-10G-xx series 10G SFP+ transceiver modules are designed to install in any SFP+ port allowing for 10GBase-X interfaces to the network through the SFP+ connector. The TN-SFP-10Gxx transceivers are Cisco compatible and are designed for bi-directional serial-optical data communication such as 10G Ethernet at speeds up to 10.3 Gbps. Lantronix SFP and SFP+ modules fully comply with the Multi-Sourcing Agreement (MSA). This compliance allows our SFP+ modules to be used in all other MSA compliant SFP+ platforms. In addition, Lantronix SFP modules are also compatible with all Cisco SFP+ based routers and switches, as well as Cisco's IOS software. Lantronix SFP and SFP+ modules ARE NOT Cisco OEM brand modules. TN-CWDM-10G-1xx0-40 Series: The TN-CWDM-40G-1xx0-40 10G modules are Cisco Compliant* and are designed for bi-directional serial-optical data communications such as 10G Ethernet. Each X2/XFP/SFP+ operates at a nominal CWDM wavelength. There are 8 wavelengths available in 20nm steps from 1470nm to 1610nm. TN-SFP-10G-xR Series: The TN-SFP-10G-xR series 10G SFP+ transceiver modules are designed to install in any SFP+ port allowing for 10GBase-X interfaces to the network through the SFP+ connector. The TN-SFP-10G-xR transceivers are Cisco Compliant* and are designed for bi-directional serial optical data communication such as 10G Ethernet at speeds up to 10.3 Gbps. Features • SFP+ Optical Transceiver with LC connector • 10G small Form-Factor Pluggable (SFP+) MSA compatible • Compliant with IEEE 802.3ae 10GBASE-SR/LR/LW • SFF-8472 Digital Diagnostic Function (DMI) • Single +3.3 V Power Supply • RoHS Compliant (all models) • Class 1 Laser International Safety Standard IEC 60825 Compliant Specifications and Standards The TN-SFP-10G-xxx and TN-CWDM-10G-xxx are designed to meet these standards and specifications: Standards Compliance Dimensions Power Input Output Wavelength Shipping Weight Voltage Operating Temp Storage Temp Humidity Warranty IEEE 802.3z, IEEE 802.3ae, 10GBASE-SR/LR/LW, 10GBase-ER/EW, SFF-8472 Digital Diagnostic function (DMI). IEEE 802.3az (TN-SFP-10G-T) RoHS Compliant (all models) Class 1 Laser International Safety Standard IEC 60825 Compliant FDA 21; CFR 1040.10 and 1040.11 Width: 0.52" [13 mm] x Depth: 2.18" [55 mm] x Height: 0.33" [8 mm] 3.3V -5.5nm < λc < +7.5nm 1 lb (16 oz) approximately 3.3V 0°C to +70°C (32°F to 158° F) -40°C to +85°C (-40° to 185°F) 5% to 95%, non-condensing Lifetime 33499 Rev. E https://www.lantronix.com/ 4