Lantronix TN-J915xA Series TN-J915xA User Guide Rev C - Page 7
SFP Unpacking, Lantronix, TN-J9xxx SFP Plus User Guide, Rev. C, of 15
View all Lantronix TN-J915xA Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Lantronix TN-J9xxx SFP Plus User Guide SFP Unpacking Before you start installing the TN-J91xx, verify that the package contains the following items: o One TN-J91xx o Two protective foam pieces o One Documentation Postcard Please notify your sales representative immediately if any of the above items is missing or damaged. Save the packaging for possible future use. TN-SFP distances, TX power, RX power, and link budgets can be found on Lantronix website, document "SFP/XFP Fiber and Copper Connectors." The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11. WARNING: Visible and invisible laser radiation when open. Do not stare into the beam or view the beam directly with optical instruments. Failure to observe this warning could result in an eye injury or blindness. IMPORTANT: Copper based media ports such as Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are intended to be connected to intra-building (inside plant) link segments that are not subject to lightening transients or power faults. Copper-based media ports such as Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter-building (outside plant) link segments that are subject to lightening transients or power faults. 33505 Rev. C http://www.lantronix.com/ Page 7 of 15