Lantronix TN-QSFP-40G Series TN-QSFP-40G Series Datasheet PDF 300.55 KB - Page 1

Lantronix TN-QSFP-40G Series Manual

Page 1 highlights

TN-QSFP-40G Series Cisco Compliant 40G QSFP+ QSFP+ 40GBase-X With DMI TN-QSFP-40G-SR-BD TN-QSFP-40G-IR4 The Transition Networks TN-QSFP-40G series 40G QSFP+ optical transceivers are designed to install in any QSFP+ port allowing for 40GBase-X interfaces to the network through the QSFP+ connector. The TN-QSFP-40G transceivers are Cisco Compliant* and are designed for bi-directional serialoptical data communication such as 40G Ethernet. Applications include: 40G Ethernet, 10G Ethernet, and Data Center Aggregation Connection. Features ● High capacity: up to 44.4 Gbps per module ● Compliant with SFF 8436 QSFP+ MSA ● Single +3.3 V Power Supply ● RoHS Compliant ● Digital Diagnostic Monitoring ● Low Power Dissipation : SR4< 1.5 Watts, all other modules < 3.5 Watts ● 40GBase-SR4: 4 lanes, up to 11.1Gbps per lane, Standard MPO connector ● 40GBase-LR4 & 40GBase-LR4-3: 4 wavelength CWDM Mux/ Demux design, up to 11.1Gbps per wavelength, Duplex LC connector ● 40GBase-SR-BD: two transmit/ receive channels, 20Gbps each channel, 850 - 900nm wavelength range, Duplex LC connector ● 40GBase-IR4: 4 wavelength CWDM Mux/Demux design, up to 11.1Gbps per wavelength, Duplex LC connector Specifications Standards IEEE 802.3ba SFF 8436 Dimensions Width: 0.71" [18 mm] Depth: 2.83" [72 mm] Height: 0.33" [8.5 mm] Power Input 3.3V Environment Operating: 0°C to +70°C Storage: -40°C to +85°C Certifications IEC 60825-1, FDA CDRH 21-CFR 1040.10 Class 1 Warranty Lifetime *Transition Networks' QSFP+ modules fully comply with the MultiSourcing Agreement (MSA). This compliance allows our QSFP+ modules to be used in all other MSA compliant QSFP+ platforms. In addition, Transition Networks QSFP+ modules are also Compliant with all Cisco QSFP+ based routers and switches, as well as Cisco's IOS software. Transition Networks QSFP+ modules ARE NOT Cisco OEM brand modules. Ordering Information Duplex TN-QSFP-40G-SR4 QSFP+ 40GBase-SR4, 850nm multimode (MPO) [400m/1313ft. on OM4, 300m/985ft. on OM3] with DMI Link Budget: 2.3 dB TN-QSFP-40G-SR-BD QSFP+ 40GBase-SR-BD, 850nm/900nm multimode (LC) [150m/492ft. on OM4, 100m/328ft. on OM3] Link Budget: 3.0 dB TN-QSFP-40G-IR4 QSFP+ 40GBase-IR4, 1271nm, 1291nm, 1311nm, 1331nm, single mode (LC) [2km/1.24mi.] with DMI Link Budget: 6.7 dB TN-QSFP-40G-LR4 QSFP+ 40GBase-LR4, 1271nm, 1291nm, 1311nm, 1331nm, single mode (LC) [10km/6.2mi.] with DMI Link Budget: 7.0 dB TN-QSFP-40G-LR4-3 QSFP+ 40GBase-LR4, 1271nm, 1291nm, 1311nm, 1331nm single mode (LC) [30km/18.7mi.] with DMI Link Budget: 9.0 dB SFPs & CWDM 081220 +1.952.941.7600 | www.transition.com | [email protected] 177

  • 1

Specifications
Standards
IEEE 802.3ba
SFF 8436
Dimensions
Width: 0.71” [18 mm]
Depth: 2.83” [72 mm]
Height: 0.33” [8.5 mm]
Power Input
3.3V
Environment
Operating: 0°C to +70°C
Storage: -40°C to +85°C
Certifications
IEC 60825-1, FDA CDRH 21-CFR 1040.10 Class 1
Warranty
Lifetime
*Transition Networks’ QSFP+ modules fully comply with the Multi-
Sourcing Agreement (MSA). This compliance allows our QSFP+ modules
to be used in all other MSA compliant QSFP+ platforms. In addition,
Transition Networks QSFP+ modules are also Compliant with all Cisco
QSFP+ based routers and switches, as well as Cisco’s IOS software.
Transition Networks QSFP+ modules ARE NOT Cisco OEM brand modules.
TN-QSFP-40G Series
Cisco Compliant 40G QSFP+
Features
High capacity: up to 44.4 Gbps per
module
Compliant with SFF 8436 QSFP+
MSA
Single +3.3 V Power Supply
RoHS Compliant
Digital Diagnostic Monitoring
Low Power Dissipation : SR4< 1.5
Watts, all other modules < 3.5 Watts
40GBase-SR4: 4 lanes, up to
11.1Gbps per lane, Standard MPO
connector
40GBase-LR4 & 40GBase-LR4-3:
4 wavelength CWDM Mux/
Demux design, up to 11.1Gbps per
wavelength, Duplex LC connector
40GBase-SR-BD: two transmit/
receive channels, 20Gbps each
channel, 850 - 900nm wavelength
range, Duplex LC connector
40GBase-IR4: 4 wavelength
CWDM Mux/Demux design, up to
11.1Gbps per wavelength, Duplex
LC connector
Ordering Information
Duplex
TN-QSFP-40G-SR4
QSFP+ 40GBase-SR4, 850nm multimode
(MPO)
[400m/1313ft. on OM4, 300m/985ft. on
OM3] with DMI Link Budget: 2.3 dB
TN-QSFP-40G-SR-BD
QSFP+ 40GBase-SR-BD, 850nm/900nm
multimode (LC)
[150m/492ft. on OM4, 100m/328ft. on
OM3] Link Budget: 3.0 dB
TN-QSFP-40G-IR4
QSFP+ 40GBase-IR4, 1271nm, 1291nm,
1311nm, 1331nm, single mode (LC)
[2km/1.24mi.] with DMI
Link Budget: 6.7 dB
TN-QSFP-40G-LR4
QSFP+ 40GBase-LR4, 1271nm, 1291nm,
1311nm, 1331nm, single mode (LC)
[10km/6.2mi.] with DMI
Link Budget: 7.0 dB
TN-QSFP-40G-LR4-3
QSFP+ 40GBase-LR4, 1271nm, 1291nm,
1311nm, 1331nm single mode (LC)
[30km/18.7mi.] with DMI
Link Budget: 9.0 dB
The Transition Networks TN-QSFP-40G series 40G QSFP+
optical transceivers are designed to install in any QSFP+ port
allowing for 40GBase-X interfaces to the network through
the QSFP+ connector. The TN-QSFP-40G transceivers are
Cisco Compliant* and are designed for bi-directional serial-
optical data communication such as 40G Ethernet.
Applications include: 40G Ethernet, 10G Ethernet, and Data
Center Aggregation Connection.
QSFP+ 40GBase-X With DMI
177
+1.952.941.7600 | www.transi±on.com | sales@transi±on.com
SFPs & CWDM
TN-QSFP-40G-IR4
TN-QSFP-40G-SR-BD
081220