Lantronix xPico 200 Evaluation Kit Xpico 200 Firmware Instructions - Page 8
xp200-cmd_teraterm - wifi.bat, ttermpro.exe, xP200-cmd_teraterm - wifi.bat
View all Lantronix xPico 200 Evaluation Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
• Certification Firmware Instructions - this document. • xp200-cmd_teraterm - wifi.bat - the batch file that launches Tera Term and executes the macro. 3. Copy the xPico200_MFG_Test directory to the C:\ drive of your PC. Note: If you copy it to another directory on your PC, you may need to modify the load scripts to point to a different directory. 4. Install Tera Term on your PC. This was tested with Tera Term 4.73 but also works with other versions. Note: The xp200-cmd_teraterm - wifi.bat file contains a link to ttermpro.exe, the Tera Term executable. Modify this link if the executable is in a different directory on your PC. 5. Connect the serial port of the module to your PC. 6. Double click the xP200-cmd_teraterm - wifi.bat file in the xPico200_MFG_Test directory. 7. In the Comport Number window that opens, enter the COM port that's connected to the xPico 200 module and click OK. 8. Click OK to start. xPico 200 Series Certification Firmware Instructions 8