Lantronix xPico IAP xPico IAP - Product Brief (A4) - Page 2
Ordering Information
View all Lantronix xPico IAP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Features and Specifications > Serial Interface • Two Serial CMOS Ports* (3.3V, 5V tolerant) • 300 to 115.2 kbps for Modbus enabled serial port • Control signals: DTR/DCD, RTS/CTS (Port 1 only) • Flow control XON/XOFF • Programmable I/O: 8 PIO pins (software selectable) • Lantronix Modbus Application • Modbus TCP, Modbus ASCII, Modbus RTU. Master and Slave mode support * Modbus can only be operated on one serial port at a time. > Network Interface • Interface: Ethernet 10Base-T or 100Base-TX (Autosensing) > Network Protocols • TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1, TFTP, Modbus TCP, ASCII, RTU > Management and Control • SNMP, Telnet, Serial • Field upgradable firmware > Architecture • Based on the DSTni-EX Enhanced 16-bit x86 Architecture • Memory: 256KB SRAM, 512KB Flash > Available Software • MS Windows based DeviceInstaller™ • MS Windows based Com Port Redirector > Power • Input Voltage: 3.3VDC > Physical Interface • 40-pin Board-to-Board SMT Connector > Environmental • Operating Temperature: -40° to +85° C • Storage Temperature : -40° to +85° C • Relative Humidity: 0% to 90% non-condensing > Packaging • Dimensions: 24mm (L) x 16.5mm (W) x 5.64mm (H) • Weight: 2.5g > Warranty • 5-Year Limited Ordering Information United States Call: 800.422.7055 Email: [email protected] Buy Online: http://www.lantronix.com NASDAQ: LTRX Asia/Pacific Call: +852 3428.2338 Email: [email protected] Europe Call: +31 (0) 76.52.3.6.74 4 Email: [email protected] Japan Call: +81.3.6277.8802 Email: [email protected] > Part Number > Description XPC10010MB-01 xPico Device Server Module, Extended Temperature, Modbus, RoHS, Bulk XPC10010MS-01 xPico Device Server Module, Extended Temperature, Modbus, RoHS, Sample XPC100A001 xPico Module Mounting Quick Clip Bulk pack (50 pc) © 2013 Lantronix, Inc. Lantronix, xPico, and DeviceInstaller are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 940-049 Rev A