Lenovo 019624U Hardware Maintenance Manual - Page 80
When installing, For MT0196 and MT0492, on the part marked
View all Lenovo 019624U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
When installing: Attach the system board so that the battery pins of the system board are attached firmly to the guide hole of the base cover as shown in a in this. Make sure that the connectors are attached firmly. Note: Loosen the screws 9 , but do not remove them. 9 9 10 11 When installing: • Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. You need to peel the thin film off from the rubbers b . For MT0196 and MT0492: b a b 74 Hardware Maintenance Manual
When installing:
Attach the system board so that the battery pins of the system board are attached firmly to
the guide hole of the base cover as shown in
a
in this.
Make sure that the connectors are attached firmly.
Note:
Loosen the screws
9
, but do not remove them.
9
9
11
10
When installing:
•
Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams,
on the part marked
a
as in the following figure. Either too much or too less application of grease can
cause a thermal problem due to imperfect contact with a component. You need to peel the thin film
off from the rubbers
b
.
For MT0196 and MT0492:
a
b
b
74
Hardware Maintenance Manual