Lenovo 03019AU Hardware Maintenance Manual - Page 50
Load Setup Default in BIOS Setup Utility., Microprocessor ID:xx Failed.
View all Lenovo 03019AU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 2. Numeric error codes (continued) Symptom or error (beeps, if any) FRU or action, in sequence 0251 System CMOS checksum bad- Default configuration used. (two short beeps) 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 0254 System NV7 Volume checksum bad- Default configuration used (two short beeps) Turn off the computer and discharge CMOS. Then restart the computer. 0260 System timer error. (two short beeps) 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 3. System board. 0270 Real-time clock error. (two short beeps) 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 3. System board. 0271 Date and time error-Neither the date nor the time is set in the computer. (two short beeps) Run BIOS Setup Utility to reset the time and date. 0280 Previous boot incomplete- Default configuration used. (two short beeps) 1. Load "Setup Default" in BIOS Setup Utility. 2. Memory module. 3. System board. 02D0 System cache error. (two short beeps) 1. Microprocessor. 2. System board. 02F0 Microprocessor ID:xx Failed. 1. Microprocessor. 2. System board. 02F5 DMA test failed. (two short beeps) 1. Memory module. 2. System board. 02F6 Software NMI failed (two short beeps) 1. Memory module. 2. System board. 02F7 Fail-safe timer NMI failed (two short beeps) 1. Memory module. 2. System board. 1802 Unauthorized network card is plugged in-Turn off and remove the miniPCI network card. (two short beeps) 1. Remove the Mini PCI network card. 2. System board. 1804 Unauthorized WAN card is plugged in-Power off and remove the WAN card. 1. Remove the wireless WAN card. 2. System board. 44 Hardware Maintenance Manual