Lenovo 06462MU Lenovo IdeaPad Y560 Hardware Maintenance Manual V2.0 - Page 48
Removal steps of fan assembly and heat sink assembly continued, Loosen two screws
![]() |
View all Lenovo 06462MU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
IdeaPad Y560 Hardware Maintenance Manual Figure 7. Removal steps of fan assembly and heat sink assembly (continued) Loosen two screws 5 to detach the fan assembly and the heat sink assembly. c 5 a 5 b When installing: •• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, to the a b part shown in the figure above. Either too much or too less grease application can cause a thermal problem due to imperfect contact with a component. In models with the discrete graphics chip, there is an additional thermal rubber c whose film to be peeled off. 44
![](/manual_guide/products/lenovo-ideapad-y560-lenovo-ideapad-y560-hardware-maintenance-manual-v20-79a67bd/48.png)
44
IdeaPad Y560 Hardware Maintenance Manual
Figure 7. Removal steps of fan assembly and heat sink assembly (continued)
Loosen two screws
5
to detach the fan assembly and the heat sink assembly.
a
b
c
5
5
When installing:
Before you attach the fan assembly to the computer, apply thermal grease,
•
at an amount of 0.2 grams, to the
a
b
part shown in the figure above. Either
too much or too less grease application can cause a thermal problem due
to imperfect contact with a component. In models with the discrete graphics
chip, there is an additional thermal rubber
c
whose film to be peeled off.