Lenovo 25002XU User Manual - Page 99
Hard disk drive (HDD) cover
View all Lenovo 25002XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter For access, remove this FRU: v "1010 Battery pack" on page 88 Attention: v Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. v Before removing the drive, have the user make a backup copy of all the information on it if possible. v Never remove the drive while the system is operating or is in suspend mode. v When replacing a hard disk drive in a RAID configured array, depending on which type of array is used, rebuilding the RAID array might be required. For more information, see "Installing and configuring RAID" on page 71 v In this product, RAID is not enabled by default. v When you replace the HDD or HDDs used in the models with RAID mode, be sure to install HDDs that have same FRU no.s both in HDD slot 0 and in slot 1. v Good or non-failing drives have to be in HDD slot 0 if you have RAID 1. Table 12. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage converter 1 Step 1 Screw (quantity) M3 × 3 mm, wafer-head, nylon-coated (1) Color Black Torque 0.392 Nm (4 kgfcm) Removing and replacing a FRU 91