Lenovo 305-14IBD Laptop Hardware Maintenance Manual - IdeaPad 305-14IBD - Page 55

Fan and heat sink assembly

Get Lenovo 305-14IBD Laptop PDF manuals and user guides View all Lenovo 305-14IBD Laptop manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Lenovo ideapad 305-14IBD 1120 Fan and heat sink assembly For access, remove these FRUs in order: • "1010 Battery pack" on page 34 • "1020 Optical drive" on page 35 • "1030 Bottom slot cover" on page 37 • "1040 Hard disk drive" on page 38 • "1050 DIMM" on page 40 • "1060 PCI Express Mini Card for wireless LAN/WAN" on page 41 • "1070 Keyboard" on page 42 • "1080 Keyboard bezel" on page 44 • "1110 System board" on page 49 Figure 12. Removal steps of fan and heat sink assembly Disconnect the fan connector in the direction by arrow a. Remove the screw b and six screws c. Then remove the fan and heat sink in the direction as shown by arrow d. 3 3 3 3 4 2 3 1 Step d b 7 d c 7 Screw (quantity) M2 x 5 mm, flat-head, nylok-coated (1) M2 x 3 mm, flat-head, nylok-coated (6) Color Torque Silver 1.5~2.0kgf.cm Black 1.0~1.5kgf.cm When installing: Make sure that all the fan and DC-IN connectors are attached firmly. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Lenovo ideapad 305-14IBD
51
1120 Fan and heat sink assembly
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 34
•
“1020 Optical drive” on page 35
•
“1030 Bottom slot cover” on page 37
•
“1040 Hard disk drive” on page 38
•
“1050 DIMM” on page 40
•
“1060 PCI Express Mini Card for wireless LAN/WAN” on page 41
•
“1070 Keyboard” on page 42
•
“1080 Keyboard bezel” on page 44
•
“1110 System board” on page 49
Figure 12. Removal steps of fan and heat sink assembly
Disconnect the fan connector in the direction by arrow
. Remove the screw
and six screws
. Then remove the fan and heat sink in the direction as shown
by arrow
When installing:
Make sure that all the fan and DC-IN connectors are attached
firmly.
Step
Screw (quantity)
Color
Torque
M2 x 5 mm, flat-head, nylok-coated (1)
Silver
1.5~2.0kgf.cm
M2 x 3 mm, flat-head, nylok-coated (6)
Black
1.0~1.5kgf.cm
a
b
c
d
3
3
3
3
2
1
4
3
b
c