Lenovo 5852A1U User Manual - Page 26
Installing or replacing a PCI card, What to do next, Attention
View all Lenovo 5852A1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
7. Position the new memory module over the memory slot. Make sure that the notch 1 on the memory module aligns correctly with the slot key 2 on the system board. Push the memory module straight down into the slot until the retaining clips close. Figure 10. Installing a memory module What to do next: v To work with another piece of hardware, go to the appropriate section. v To complete the installation or replacement, go to "Completing the parts replacement" on page 37. Installing or replacing a PCI card Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to install or replace a PCI card. Your computer has one standard PCI card slot and one PCI Express x16 graphics card slot. To install or replace a PCI card, do the following: 1. Turn off the computer and disconnect all power cords from electrical outlets. 2. Open the computer cover. See "Opening the computer cover" on page 14. 3. Rotate the PCI card retainer to the open position. 18 User Guide