Lenovo 7522h6U User Guide - Page 27

Installing, drive

Get Lenovo 7522h6U - Thinkcentre A58 E1400 160GB HD PDF manuals and user guides
UPC - 884343941301
View all Lenovo 7522h6U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Installing a drive in bay 2 Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to install an optical drive or an additional hard disk drive in bay 2. To install an optical drive or an additional hard disk drive in bay 2: 1. Open the computer cover. See "Opening the computer cover" on page 12. 2. Remove the metal shield from the drive bay by using a flat-blade screwdriver to gently pry it loose. 3. Install the optical drive retainer on the left side of the optical drive to be installed. Figure 13. Installing the retainer 4. Slide the drive into the bay until it locks into position. Figure 14. Installing the drive 5. Pivot the drive bay assembly upward to gain access to the cable connections and connect the signal cable and the power cable for the drive. 6. Continue at "Connecting a SATA drive" on page 20. Chapter 2. Installing options and replacing hardware 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Installing
a
drive
in
bay
2
Attention
Do
not
open
your
computer
or
attempt
any
repair
before
reading
and
understanding
the
“Important
safety
information”
in
the
ThinkCentre
Safety
and
Warranty
Guide
that
came
with
your
computer.
To
obtain
a
copy
of
the
ThinkCentre
Safety
and
Warranty
Guide
,
go
to:
This
section
provides
instructions
on
how
to
install
an
optical
drive
or
an
additional
hard
disk
drive
in
bay
2.
To
install
an
optical
drive
or
an
additional
hard
disk
drive
in
bay
2:
1.
Open
the
computer
cover.
See
“Opening
the
computer
cover”
on
page
12.
2.
Remove
the
metal
shield
from
the
drive
bay
by
using
a
flat-blade
screwdriver
to
gently
pry
it
loose.
3.
Install
the
optical
drive
retainer
on
the
left
side
of
the
optical
drive
to
be
installed.
4.
Slide
the
drive
into
the
bay
until
it
locks
into
position.
5.
Pivot
the
drive
bay
assembly
upward
to
gain
access
to
the
cable
connections
and
connect
the
signal
cable
and
the
power
cable
for
the
drive.
6.
Continue
at
“Connecting
a
SATA
drive”
on
page
20.
Figure
13.
Installing
the
retainer
Figure
14.
Installing
the
drive
Chapter
2.
Installing
options
and
replacing
hardware
19