Lenovo A300 Lenovo IdeaCentre A3 Series Hardware Maintenance Manual - Page 44
To remove the rear cover
View all Lenovo A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Hardware Maintenance Manual To remove the rear cover: Note For this procedure, it helps to place the LED panel face-down on a soft flat surface. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage. 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, turn off all attached devices, and the computer. 2. Unplug all power cords from electrical outlets. 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. 4. Remove the hinge cover and the hinge. Refer to "Removing the hinge cover" and "Removing the hinge from the LED panel" 5. Place the LED panel upside down on a flat surface. Slide the rear cover towards you then lift it up. 42