Lenovo A600 Lenovo IdeaCentre A600 Quick Reference V1.2 - Page 1

Connect the power adapter to the computer and the electrical outlet as shown below. Press the power button on the side of the computer to turn it on. Before using the accompanied peripherals, carefully read the detailed information in the Safety and Warranty Guide. Since different models have different peripherals, you might not find all of the described items depending on the actual model you purchased. Note: The remote control cannot turn the computer on. When using the computer for the first time, you need to establish a connection from the wireless keyboard and mouse to the computer. See section Wireless keyboard and mouse instructions on this flyer for more details. Power connector Ethernet connector TV tuner (Select models only) USB ports (4) Power button Adjust the angle for the best viewing experience. Do not push the screen back beyond the stand's fixed limit of 15 degrees, or the computer could fall over. Do not pull the screen forward beyond the stand's fixed limit of 5 degrees, or the computer could fall over and the screen could be damaged. Do not put your hand on the stand joint when adjusting the screen. Computer instructions 6 10 9 8 1 7 2 3 4 Note: The buttons at the bottom of the screen are touch buttons. When you touch these, the indicator lights turn on. 1 Power button 2 USB ports (2) 3 Headphone connector 4 Microphone connector 5 Optical drive slot 5 6 Camera 7 Brightness down touch button 8 Brightness up touch button 9 LCD On/Off 10 Optical drive eject touch button Important information on how to use this computer Insert a disc with the non-label side facing the user. The disc cannot be read if you insert it the other side up. To eject a disc, press the eject button at the bottom of the touch screen. Do not obliquely insert discs into the optical drive slot. Doing so will damage the drive and scratch the discs. Do not hold the computer by the stand joint only. Doing so could damage the stand joint. Important information on how to use the optical drive 1. Do not insert 3-inch discs into the optical drive slot. 2. Insert the disc into the optical drive slot and push gently until the disc enters automatically. 3. Do not force the disk when it is being inserted/ejected. 4. Do not insert damaged discs. 5. Do not insert any other objects other than discs. Not following the above guidelines could damage the optical drive slot and disc. Hold the computer firmly when you carry it. Wireless keyboard and mouse instructions 1 1 Unpack and verify the items in the box. Front view 2 Open Close 2 Put 2 AAA batteries in the keyboard's battery compartment. ON/OFF Wireless Reset button Adjust the cursor response speed Rear view Open the battery compartment cover. 3 3 Note: If the connection was not completed successfully, repeat the same steps. Notes: 1) When establishing a wireless connection, it is recommended to keep the distance from the keyboard/mouse to the computer less than 25 cm (10 inches). 2) The effective working distance of the wireless keyboard and mouse is 10 m (33 feet) (depending on the computer's working environment). If the wireless device does not work, do the following: 1. Be sure there is no physical obstacle between the wireless device and the computer. 2. Restart the computer, and verify the system devices are functional. 3. Repeat the procedure for establishing Bluetooth connection. 4. Replace the batteries. 5. Do not place the computer under a metal surface or table. 6. Make sure there are no electronic devices close by, such as speakers, remote controls of electronic toys or mobiles, which might create high electromagnetic fields that could interrupt the wireless connection. 7. Place the keyboard, mouse and remote control the right way up. 8. Remove the batteries from the keyboard, mouse and remote control if you do not use them for a long time. 9. If the batteries in the keyboard, mouse or remote control leak, clean the battery compartments as soon as possible and place new batteries. 10. Use batteries of good quality to ensure the proper functioning of the remote control. 11. When the battery power becomes low, the battery indicator light on the keyboard will change from orange to red. e LVT Adjust the keyboard stand to a more comfortable level by adjusting the feet on the back of the keyboard. 4 4 2 AA batteries Battery compartment Put 2 AA batteries in the battery compartment, making sure the position of the polarities is identical to the image. Turn on the mouse power switch. After installing the batteries, press the power button on the side of the keyboard. 5 Turn the computer on and then press Fn+F11 on the keyboard for about 5-10 seconds to establish a wireless connection between the keyboard and the computer. If you do not use the mouse for a long time, turn off the mouse power switch to save battery. 5 Press the wireless reset button on the mouse. Turn the mouse on its back ON OFF connect Turn the computer on and then press the wireless reset button on the back of the mouse for about 5 seconds to establish a wireless connection between the mouse and the computer. On the right side of the keyboard, there are touch buttons and a touch panel. The touch buttons are: Multimedia play key: Open the Mediaplay player. e Internet key: Open IE. E-Mail Key: Open the E-mail. LVT After entering Windows, press this key to launch the LVT (Lenovo Vantage Technology) program, Lenovo's pre-loaded Home PC software. In addition to its own functions, the LVT program will allow you to start other Windows compatible software, specially configured to run on this model of computer Sleep. Stop. Previous. Play or pause. Next. Mute. Volume down. Volume up. Version: 1.2 31039952