Lenovo B50-35 All in One Lenovo B50-35 All-In-One Computer Hardware Maintenanc - Page 29
Removing the stand base, Step 2. Disconnect the power cord from the connector on the computer
View all Lenovo B50-35 All in One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Step 2. Disconnect the power cord from the connector on the computer 1 , then unplug the power cord from electrical outlet. 2 B50-30/B50-35 Step 3. Connect the new power cord as shown. B50-30/B50-35 Removing the stand base Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage. Chapter 7. Replacing hardware 23
Step 2. Disconnect the power cord from the connector on the computer
1
, then unplug the power cord
from electrical outlet.
2
Step 3. Connect the new power cord as shown.
Removing the stand base
Attention:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches
or other damage.
Chapter 7
.
Replacing hardware
23