Lenovo B500 Lenovo IdeaCentre B500/B505 Quick Reference V1.1 - Page 2
Computer instructions
View all Lenovo B500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Wireless keyboard and mouse configuration A Method 1. Install the batteries. Close Put 2 AA batteries in the keyboard's battery compartment. 2 AA batteries Battery Put 2 AA batteries in the battery compartment compartment, making sure the position of the polarities is identical to the image. 3. Press the wireless connect button. OFF STATE 2 AA batteries While the computer is turned off, press the wireless connect button on the back of the keyboard and mouse. 5. Establish the wireless connection automatically. Once the wireless connection is successfully established, the indicator lights on the keyboard and mouse will turn off and they will work properly. If the wireless keyboard and mouse fail to connect according to method A, follow method B: B Method 1. Make sure the indicator lights blink. Make sure the wireless indicator lights still blink. If they stop blinking, press the connect button on the back of keyboard and mouse again. 2. Press the wireless reset button until wireless connection established. To establish the wireless connection, press and hold the wireless reset button for over 5 seconds until you hear multiple beep sounds. The wireless reset button is a touch button located at the bottom-right-side of the screen, as shown in the diagram. Before following the reset instructions, make sure the indicator light is ON. Press on any of the touch buttons ONCE to turn the indicator light ON to activate the buttons. If connection is not established successfully, refer to "Wireless keyboard and mouse instructions" in the User Guide. 2. Turn on the power switch. After installing the batteries, turn on the power switch on the side of the keyboard. Turn on the mouse power switch. If you do not plan to use the mouse for a long time, turn off the mouse power switch to save battery life. 4. Make sure the indicator lights blink and then turn on the computer. When the keyboard and mouse wireless indicator lights blink white, turn the computer on within 30 seconds to establish a wireless connection. Notes: 1) When establishing a wireless connection, it is recommended to keep the distance from the keyboard/mouse to the computer less than 25 cm (10 inches) 2) The effective working distance of the wireless keyboard and mouse is 10 m (33 feet) (depending on the computer's working environment). If the wireless device does not work, do the following: 1. Be sure there is no physical obstacle between the wireless device and the computer. 2. Restart the computer, and verify that the system devices are functional. 3. Repeat the procedure for establishing a Bluetooth connection. 4. Replace the batteries. 5. Do not place the computer under a metal surface or table. 6. Make sure there are no electronic devices close by, such as speakers, remote controls of electronic toys or mobiles, which might create high electromagnetic fields that could interrupt the wireless connection. 7. Place the keyboard, mouse and remote control the right way up. 8. Remove the batteries from the keyboard, mouse and remote control if you do not plan to use them for a long time. 9. If the batteries in the keyboard, mouse or remote control leak, clean the battery compartments as soon as possible and insert new batteries. 10. Use batteries of good quality to ensure the proper functioning of the remote control. 11. When battery power becomes low, the battery indicator light on the keyboard will change from orange to red. Computer instructions Built-in microphone Camera Wireless reset button (or Indicator lights ON/OFF button) Volume down Volume up Brightness down Brightness up LCD On/Off 1 Ċ!Optical drive 2 Ċ!Power button 3 Ċ!Card reader 4 Ċ!USB ports (2) 5 Ċ!Headphone connector 2 6 Ċ!Microphone connector 3 4 5 61 7 Ċ!AV-IN connector (Selected models only) 8 Ċ!PS/2 Keyboard connector 7 9 Ċ!Ethernet connector 12 8 10 Ċ!USB ports (2) 9 10 11 Ċ!TV-Tuner connector (Selected 11 models only) 12 Ċ!Power connector When the battery indicator light blinks red, it means that the battery power becomes low. When the battery indicator light blinks white, it means that the keyboard or mouse is being connected. LVT LVT : After entering Windows, press this key to launch the LVT (Lenovo Vantage Technology) program, Lenovo's pre-loaded Home PC software. In addition to its own functions, the LVT program will allow you to start other Windows compatible software, specially configured to run on this model of computer.