Lenovo B560 Lenovo B560/V560 Hardware Maintenance Manual V2.0 - Page 41

Hard disk drive, Attention

Page 41 highlights

Lenovo V560/B560 1040 Hard disk drive For access, remove these FRUs in order: •• "1010 Battery pack" on page 34 •• "1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover" on page 36 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damages and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible. • Never remove the drive while the system is operating or is in suspend mode. Figure 4. Removal steps of hard disk drive Remove the screw 1 and pull the tab up in the direction shown by arrow 2 to remove the hard disk drive from the slot. 2 1 Step 1 Screw (quantity) M2 × 6 mm, flat-head, nylok-coated (1) Color Black Torque 1.6 kgfcm When installing: Make sure that the HDD connector is attached firmly. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90

37
Lenovo V560/B560
1040 Hard disk drive
For access, remove these FRUs in order:
“1010 Battery pack” on page 34
“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover
” on page 36
Attention:
Do not drop the hard disk drive or apply any physical shock to it.
The hard
disk drive is sensitive to physical shock. Improper handling can cause damages
and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on
it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Figure 4. Removal steps of hard disk drive
Remove the screw
1
and pull the tab up in the direction shown by arrow
2
to
remove the hard disk drive from the slot.
2
1
Step
Screw (quantity)
Color
Torque
1
M2 × 6 mm, flat-head, nylok-coated (1)
Black
1.6 kgfcm
When installing:
Make sure that the HDD connector is attached firmly.