Lenovo C260 Lenovo C260 All-In-One PC Hardware Maintenance Manual - Page 47
ReplacingtheLEDpanel
View all Lenovo C260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
a. Line up the holes in the new converter board with the mounting holes on the bracket and secure the new converter board with the screw. b. Connect the 2 cables to the new converter board. Step 9. Reattach the rear cover and secure it with the screws. Replacing the LED panel Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover. To replace the LED panel: Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the rear cover. Refer to "Removing the rear cover". Remove the converter board. Refer to "Replacing the converter board". Remove the camera. Refer to "Replacing the camera". Chapter 7. Replacing hardware 41