Lenovo C315 Lenovo C310/C315 Series Hardware Replacement Guide V1.0 - Page 16

Replacing the mouse

Page 16 highlights

Replacing the mouse Attention: Do not remove the computer cover or attempt any repair before reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com. To replace the mouse: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, and turn off all attached devices and the computer. 2. Unplug all power cords from electrical outlets. 3. Locate the connector for the mouse. Refer to "Left and right view" and "Rear view". Note: Your mouse connected to the USB connector at either side or the rear of the computer. 4. Disconnect the failing mouse cable from the computer and connect the new mouse cable to the same connector. Hardware Replacement Guide 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

13
Hardware Replacement Guide
Replacing the mouse
Attention:
Do not remove the computer cover or attempt any repair before reading the
“Important safety information” in the
Safety and Warranty Guide
that was
included with your computer or in the
Hardware Maintenance Manual
(HMM)
for the computer. To obtain copies of the
Safety and Warranty Guide
or
HMM
, go to the Support Web site at http://consumersupport.lenovo.com.
To replace the mouse:
1.
Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, and turn off all attached devices and the
computer.
2.
Unplug all power cords from electrical outlets.
3.
Locate the connector for the mouse. Refer to “Left and right view” and “Rear
view”.
Note:
Your mouse connected to the USB connector at either side or the rear
of the computer.
4.
Disconnect the failing mouse cable from the computer and connect the new
mouse cable to the same connector.