Lenovo C470 Lenovo C470 All-In-One Computer Hardware Maintenance Manual - Page 48

Removing the middle case, Step 7. Remove the stand holder. Refer to Removing the stand holder.

Get Lenovo C470 PDF manuals and user guides View all Lenovo C470 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

• WLAN card • TV-Tuner card • Heat-sink • Memory module Step 18. Reattach the EMI cover, middle cover, optical drive, stand holder, foot cover and stand base. Removing the middle case Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage. To remove the middle case: Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Step 4. Remove the stand base. Refer to "Removing the stand base". Step 5. Remove the foot cover. Refer to "Removing the foot cover". Step 6. Remove the optical drive. Refer to "Replacing the optical drive". Step 7. Remove the stand holder. Refer to "Removing the stand holder". Step 8. Remove the middle cover. Refer to "Removing the middle cover". Step 9. Disconnect the power switch board cable from the connector. Step 10. Remove the ten screws that secure the middle case to the chassis, then lift up the middle case from the left side (optical drive side) to remove the middle case. 42 Lenovo C470 All-In-One ComputerHardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
• WLAN card
• TV-Tuner card
• Heat-sink
• Memory module
Step 18. Reattach the EMI cover, middle cover, optical drive, stand holder, foot cover and stand base.
Removing the middle case
Note:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommendsthatyouuseablanket,towel,orothersoftclothtoprotectthecomputerscreenfromscratches
or other damage.
To remove the middle case:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the stand base. Refer to “Removing the stand base”.
Step 5. Remove the foot cover. Refer to “Removing the foot cover”.
Step 6. Remove the optical drive. Refer to “Replacing the optical drive”.
Step 7. Remove the stand holder. Refer to “Removing the stand holder”.
Step 8. Remove the middle cover. Refer to “Removing the middle cover”.
Step 9. Disconnect the power switch board cable from the connector.
Step 10. Remove the ten screws that secure the middle case to the chassis, then lift up the middle case
from the left side (optical drive side) to remove the middle case.
42
Lenovo C470 All-In-One ComputerHardware Maintenance Manual