Lenovo E49 Laptop Hardware Maintenance Manual - Lenovo E49 - Page 73
LCD front bezel, Applying labels to the base cover
View all Lenovo E49 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Applying labels to the base cover The new base cover is shipped with a kit containing labels of several kinds. The following illustration shows the label locations on the base cover. 1 23 4 567 14 13 12 8 9 11 10 When you replace the base cover, apply the following label: 6 FCC label Note: If you replace a part with the Windows Certificate of Authentication (COA) label 1 , return the old part with the label attached to the customer. Otherwise, you can provide the customer with a letter, stating the original location of the label on the computer and the information on the label, such as the part number, serial number, and product key. The following labels need to be peeled off from the old base cover, and need to be put on the new base cover. 2 Information label 3 SYS barcode label 4 GEO label 5 PRC label 7 SIRIM label or Indonesia postel label 8 Asset tag 9 Asset tag 10 Non Encryption label 11 ECC label 12 Indonesia rating label 13 Rating label I 14 Rating label II For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels, apply both to the new base cover. 2010 LCD front bezel For access, remove these FRUs in order: • "1010 Battery pack" on page 44 • "1140 LCD unit" on page 62 Chapter 7. Removing and replacing a FRU 67