Lenovo G400 G400&G410 User's Guide - Page 40

Security, Set User Password, Enter New, Password, Confirm New Password, Enter Current Password, - bios key

Get Lenovo G400 PDF manuals and user guides View all Lenovo G400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Lenovo EVEREST UG.book Page 32 Friday, August 17, 2007 5:40 PM Getting Started Note: If you set passwords through the BIOS Setup Utility and you put your computer into sleep mode by pressing Fn + F1, the following describes the behavior of the computer when you bring it out of sleep mode: • You are prompted to type the Windows log-on password rather than the User password to resume operation. • If an HDD password is assigned to any hard disk drive, the hard disk drive is unlocked automatically when you resume operation. To set a User Password: 1. Turn on your computer. Press F2, while the initial screen is displayed. The BIOS Setup Utility screen opens. 2. Select Security, using the cursor directional keys. 3. Select Set User Password, and press the Enter key. The Set User Password window opens. 4. Choose your user password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5. Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6. Commit your password to memory, and press the Enter key. 7. Press F10 to exit. 8. Select Yes in the Setup Confirmation window. Changing or Removing the User Password To change the password, do the following: 1. In the Enter Current Password field, type your current password. 2. In the Enter New Password field, type a new password; then retype it to verify. To remove the password, do the following: 1. In the Enter Current Password field, type your current password. 2. Leave the Enter New Password field blank, and then press the Enter key twice. Note: Make sure the Password on boot is set to Enabled if you need the password protection at power on. 32 Lenovo 3000 G400 and G410 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Getting Started
32
Lenovo 3000 G400 and G410 User Guide
Note:
If you set passwords through the BIOS Setup Utility and you put
your computer into sleep mode by pressing Fn + F1, the following
describes the behavior of the computer when you bring it out of
sleep mode:
•
You are prompted to type the Windows log-on password rather
than the User password to resume operation.
•
If an HDD password is assigned to any hard disk drive, the hard
disk drive is unlocked automatically when you resume operation.
To set a User Password:
1.
Turn on your computer. Press F2, while the initial screen is displayed.
The BIOS Setup Utility screen opens.
2.
Select
Security
, using the cursor directional keys.
3.
Select
Set User Password
, and press the Enter key. The Set User
Password window opens.
4.
Choose your user password, which can be from one to eight
alphanumeric characters in any combination. Type it in the
Enter New
Password
field.
5.
Press the Enter key once to move to the
Confirm New Password
field.
Retype the password you just entered to verify it.
6.
Commit your password to memory, and press the Enter key.
7.
Press F10 to exit.
8.
Select
Yes
in the Setup Confirmation window.
Changing or Removing the User Password
To change the password, do the following:
1.
In the
Enter Current Password
field, type your current password.
2.
In the
Enter New Password
field, type a new password; then retype it to
verify.
To remove the password, do the following:
1.
In the
Enter Current Password
field, type your current password.
2.
Leave the
Enter New Password
field blank, and then press the Enter
key twice.
Note:
Make sure the
Password on boot
is set to
Enabled
if you need the
password protection at power on.
Lenovo EVEREST UG.book
Page 32
Friday, August 17, 2007
5:40 PM