Lenovo G400s Touch Hardware Maintenance Manual - Notebook - Page 64
Removal steps of LCD unit continued
View all Lenovo G400s Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Lenovo G400s/G405s/G400s Touch/G500s/G505s/G500s Touch Hardware Maintenance Manual Figure 12. Removal steps of LCD unit (continued) G400s: Release the antenna cables from the cable guides. Remove four screws a. aa aa Step a Screw (quantity) M2.5 × 4 mm, flat-head, nylok-coated (4) Color Black Torque 2.38 ~ 2.5 kgfcm When installing: • Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. • Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides. 60
Lenovo G400s/G405s/G400s Touch/G500s/G505s/G500s Touch
Hardware Maintenance Manual
60
Figure 12. Removal steps of LCD unit (continued)
G400s:
Release the antenna cables from the cable guides. Remove four screws
When installing:
•
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
•
Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
Step
Screw (quantity)
Color
Torque
M2.5 × 4 mm, flat-head, nylok-coated
(4)
Black
2.38 ~ 2.5 kgfcm
a
a
a
a
a
a