Lenovo G505 User Guide - Lenovo G400, G500, G405, G505, G410, G510 - Page 41
Fn + F2, System Memory, during startup. The BIOS setup utility screen opens.
View all Lenovo G505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Appendix. CRU instructions Note: If only one DDR3L SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot). b a To make sure that the DDR3L SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold Fn + F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer. 37
Appendix. CRU instructions
37
To make sure that the DDR3L SDRAM is installed correctly, do as follows:
1
Turn the computer on.
2
Hold
Fn + F2
during startup. The BIOS setup utility screen opens. The
System Memory
item shows the total amount of memory installed in
your computer.
Note:
If only one DDR3L SDRAM is used on the computer you are servicing, the card must be
installed in SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).
b
a