Lenovo H210 3000 H200 User Guide - Page 19

Note about the service partition: The files and relevant data used by the rescue system are saved in the service partition. Deleting this partition will render the rescue system unusable. For detailed operation information, see the following instructions: By selecting Control Panel ˠ Management Tools ˠ Computer Management ˠ Disk Management, you can see the service partition, which must not be deleted. Note: The recovery files and relevant data use by the rescue system are saved in the service partition. If the service partition is deleted or damaged by someone other than Lenovo maintainers, Lenovo shall not be liable for any losses arising there from in any way. 2.1 Installing drivers and software shipped with computer The Installing drivers and software function in the rescue system provides a way for the user to convenientlly install the drivers and software shipped with the computer. It can install all drivers and software shipped with the computer. It also can selectively install some of the drivers and software as required by the user. Method 1: Automatic Installation Turn on the computer. When the screen displays the Lenovo picture initially, press the F2 key on the keyboard to start the Rescue System, select Install drivers and software. Install them as prompted. Click Install to start installing the drivers and software. The system will start. After the system is restarted, the installation process will continue until completion. Method 2: Manual Installation In the Windows system, Click Start ˠ All Programs ˠ Lenovo ˠ Drivers and Application Installation. After starting the procedure, install all the drivers and software manually according to the prompt. Note: a. It is recommended not to install the software which is already on the computer. b. Before accessing the operating system, make sure that the Drivers 14 User Guide 31035089_3000 H_UG_EN.indd 14 2008.8.27 6:04:57 PM