Lenovo H30-50 Lenovo H30 Series Hardware Maintenance Manual - Page 43

Replacing the adapter - motherboard

Get Lenovo H30-50 PDF manuals and user guides View all Lenovo H30-50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Step 11. Position the new memory module over the memory connector. Make sure the notch 1 on the memory module is correctly aligned with the connector key 2 on the system board. Push the memory module straight down into the connector until the retaining clips close. Step 12. Reattach the computer cover. Replacing the adapter Note: For this procedure, it helps to lay the computer flat. To replace the adapter: Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Disconnect the power cables from the connectors on motherboard. Step 3. Install the new adapter： a. Connect the power cables to the connectors on the motherboard. Chapter 8. Replacing hardware 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Step 11. Position the new memory module over the memory connector. Make sure the notch
1
on the
memory module is correctly aligned with the connector key
2
on the system board. Push the
memory module straight down into the connector until the retaining clips close.
Step 12. Reattach the computer cover.
Replacing the adapter
Note:
For this procedure, it helps to lay the computer flat.
To replace the adapter:
Step 1.
Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Disconnect the power cables from the connectors on motherboard.
Step 3.
Install the new adapter
：
a.
Connect the power cables to the connectors on the motherboard.
Chapter 8
.
Replacing hardware
37