Lenovo H320 Lenovo H3 Series Hardware Replacement Guide - Page 26
To complete the part installation, on the rear of the computer.
View all Lenovo H320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
To complete the part installation: 1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. Refer to "Locating components" for the location of the various components. 2. Make sure that the cables are routed correctly before replacing the computer cover. 3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails. Then, push the computer cover closed until it snaps into position. Screw back the 3 screws on the chassis. 4. Reconnect the external cables and power cords into the computer. Refer to "Locating connectors on the front of the computer" and "Locating connectors on the rear of the computer". Note: In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will come with the CRU or will come a few days after the CRU arrives. Hardware Replacement Guide 23