Lenovo IdeaCentre B300 Lenovo IdeaCentre B300 Hardware Maintenance Manual V2.1 - Page 39
Replacing the hard disk drive
View all Lenovo IdeaCentre B300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 8. Replacing hardware 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Locating connectors on the rear of the computer". 4. Remove the computer stand. Refer to "Removing the computer stand". 5. Lift up the computer cover gently from the bottom right corner to release the cover from the setscrews . 2 2 2 2 2 2 2 1 2 2 Replacing the hard disk drive Attention Turn off the computer and wait 3 to 5 minutes to let the computer cool down before replacing the hard disk drive. 37
Chapter 8. Replacing hardware
37
3.
Disconnect all cables attached to the computer. This includes power
cords, input/output (I/O) cables, and any other cables that are
connected to the computer. Refer to “Locating connectors on the rear
of the computer”.
4.
Remove the computer stand. Refer to “Removing the computer stand”.
5.
Lift up the computer cover gently from the bottom right corner
to
release the cover from the setscrews
.
2
2
2
2
2
2
2
2
2
1
Replacing the hard disk drive
Attention
Turn off the computer and wait 3 to 5 minutes to let the computer
cool down before replacing the hard disk drive.