Lenovo IdeaCentre B310 Lenovo IdeaCentre B3 Series Hardware Replacement Guide - Page 18
Removing the computer cover
View all Lenovo IdeaCentre B310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
To reinstall the computer stand 1. Align then slide the computer stand back in and screw it back. 2. Push the stand upward as far as it will go. 3. Slide the lock to the left to unlock the computer stand. 1 2 3 Removing the computer cover To remove the computer cover: Note: For this procedure, it helps to place the computer face-down on a soft flat surface. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage. 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, turn off all attached devices, and the computer. 2. Unplug all power cords from electrical outlets. 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Locating connectors on the rear of the computer". 4. Remove the computer stand. Refer to "Removing the computer stand". *EFB$FOUSF#)3(7 &/ 3 JOEE Hardware Replacement Guide 15