Lenovo IdeaCentre B500 Lenovo IdeaCentre B5 Series Quick Reference V1.0 - Page 2

Wireless Keyboard and mouse configuration 1 Close Put 2 AA batteries in the keyboard's 2 AA batteries battery compartment. Battery Put 2 AA batteries in the battery compartment compartment, making sure the position of the polarities is identical to the image. 2 After installing the batteries, turn on the power switch on the side of the keyboard. Turn on the mouse power switch. If you do not plan to use the mouse for a long time, turn off the mouse power switch to save battery life. 3 OFF STATE ON OFF While the computer is turned off, press the wireless connect button on the back of the keyboard and mouse. 4 When the keyboard and mouse wireless indicator lights blink white, turn the computer on within 30 seconds to establish a wireless connection. 5 Once the wireless connection is successfully established, the indicator lights on the keyboard and mouse will turn off and they will work properly. If the wireless keyboard and mouse do not work, do the following: Make sure the wireless indicator lights still blink. If they stop blinking, press the connect buttons on the keyboard and mouse again, then press the wireless reset button (or the Indicator lights ON/OFF button) untill the indicator lights turn off and the wireless connection established. If connection is not established successfully, repeat the same steps. Note: If the connection was not completed successfully, repeat the same steps. Notes: 1) When establishing a wireless connection, it is recommended to keep the distance from the keyboard/mouse to the computer less than 25 cm (10 inches) 2) The effective working distance of the wireless keyboard and mouse is 10 m (33 feet) (depending on the computer's working environment). If the wireless device does not work, do the following: 1. Be sure there is no physical obstacle between the wireless device and the computer. 2. Restart the computer, and verify that the system devices are functional. 3. Repeat the procedure for establishing a Bluetooth connection. 4. Replace the batteries. 5. Do not place the computer under a metal surface or table. 6. Make sure there are no electronic devices close by, such as speakers, remote controls of electronic toys or mobiles, which might create high electromagnetic fields that could interrupt the wireless connection. 7. Place the keyboard, mouse and remote control the right way up. 8. Remove the batteries from the keyboard, mouse and remote control if you do not plan to use them for a long time. 9. If the batteries in the keyboard, mouse or remote control leak, clean the battery compartments as soon as possible and insert new batteries. 10. Use batteries of good quality to ensure the proper functioning of the remote control. 11. When battery power becomes low, the battery indicator light on the keyboard will change from orange to red. LVT LVT : After entering Windows, press this key to launch the LVT (Lenovo Vantage Technology) program, Lenovo's pre-loaded Home PC software. In addition to its own functions, the LVT program will allow you to start other Windows compatible software, specially configured to run on this model of computer. When the battery indicator light blinks red, it means that the battery power of the keyboard becomes low. When the battery indicator light blinks white, it means that the keyboard is being connected. Touch buttons The buttons at the bottom of the screen are touch buttons. When you touch these, the indicator lights turn on. Computer instructions Built-in microphone Camera Wireless reset button (or Indicator lights ON/OFF button) Volume down Volume up Brightness down Brightness up LCD On/Off 1 Ċ!Optical drive 2 Ċ!Power button 3 Ċ!Card reader 4 Ċ!USB ports (2) 5 Ċ!Headphone connector 2 6 Ċ!Microphone 3 connector 4 5 61 7 Ċ!AV-IN connector (Selected models only) 8 Ċ!PS/2 Keyboard connector 12 7 9 Ċ!Ethernet connector 8 9 10 Ċ!USB ports (2) 10 11 11 Ċ!TV-Tuner connector (Selected models only) 12 Ċ!Power connector