Lenovo IdeaCentre K200 K200 Hardware Maintenance Manual - Page 38
Note: Replacement of some models equipped with, graphic adapter bracket is different.
 |
View all Lenovo IdeaCentre K200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Hardware Maintenance Manual position to secure the adapter. 6. Refer to the "Completing the installation". Note: Replacement of some models equipped with graphic adapter bracket is different. Please remove the bracket first as the following: 1. Remove the two screws that secure the bracket at the bottom of the chassis. 2. Lift the bracket out of the chassis. 3. Then remove the adapter as above. After the Graphic Adapter is installed , install the bracket as the following: 1. Install the bracket into the chassis so that the screw holes in the bracket align with those in the chassis. Let the slot on the bracket clip the adapter. 2. Install the two screws to secure the bracket. Note: Use only the screws provided by Lenovo. 36
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33 -
34 -
35 -
36 -
37 -
38 -
39 -
40 -
41 -
42 -
43 -
44
-
45
-
46
-
47
-
48
-
49
 |
 |
Hardware Maintenance Manual
36
position to secure the adapter.
6. Refer to the “Completing the installation”.
Note: Replacement of some models equipped with
graphic adapter bracket is different.
Please remove the bracket first as the following:
1. Remove the two screws that secure the bracket at the bottom of the
chassis.
2. Lift the bracket out of the chassis.
3. Then remove the adapter as above.
After the Graphic Adapter is installed , install the bracket
as the following:
1. Install the bracket into the chassis so that the screw holes in the bracket
align with those in the chassis. Let the slot on the bracket clip the
adapter.
2. Install the two screws to secure the bracket.
Note:
Use only the screws
provided by Lenovo.